The main components of freeze drying equipment are:
Product Chamber or Manifold
The refrigeration system cools the (ice) condenser located inside the freeze dryer. The refrigeration system can also be employed to cool shelves in the product chamber for the freezing of the product.
The vacuum system consists of a separate vacuum pump connected to an airtight condenser and attached product chamber.
Control systems vary in complexity and usually include temperature and pressure sensing ability. Advanced controllers will allow the programming of a complete “recipe” for freeze drying and will include options to monitor how the freeze drying process is progressing. Choosing a control system for the freeze dryer depends on the application and use (i.e. lab vs. production).
Product chambers are typically either a manifold with attached flasks, or, a larger chamber with a system of shelves on which to place the product.
The purpose of the condenser is to attract the vapors being sublimed off of the product. Because the condenser is maintained at a lower energy level relative to the product ice, the vapors condense and turn back into solid form (ice) in the condenser. The sublimated ice accumulates in the condenser and is manually removed at the end of the freeze drying cycle (defrost step). The condenser temperature required is dictated by the freezing point and collapse temperature of the product. The refrigeration system must be able to maintain the temperature of the condenser substantially below the temperature of the product.
In shelf freeze dryers, the condenser can be located inside the product chamber (internal condenser) or in a separate chamber (external condenser) connected to the product chamber by a vapor port.
Manifold freeze dryers rely on ambient conditions to provide the heat of sublimation to the product. This heat input does not melt the product because an equivalent amount of heat is removed by vaporization of the solvent. Advanced shelf freeze dryers can provide a heat source to control/expedite the drying process and they can also employ the refrigeration system to allow freezing of product inside the unit.
Freeze dryers can be informally classified by the type of product chamber: (1) Manifold dryers where the product is typically pre-frozen in flasks (2) Shelf dryers where the product is placed in a tray or directly on a shelf (3) Combination units with both drying options.
hoosing a freeze dryer depends on the product characteristics as well as many other application-based variables including the container that the product will be dried in, the shelf area or number of ports required to accommodate the quantity to be dried in each batch, the total volume of ice to be condensed and whether there are any organic solvents. The type and shape of product being dried and its end-use also need to be considered. Drying Equipment Manufacturer - Guanfeng offer more helpful articles and technical papers, please visit Drying Equipment: https://www.gf-machine.com/product/drying-equipment/